BOV Plumb Kit | Upgrade for Blow Off Valves | Increase Vacuum
BOV Plumb Kit | Upgrade for Blow Off Valves (or Diverters)
  1. increases vacuum flowto Blow Off Valve with larger hose/larger manifold nipple
  2. highly recommended for turbo chargers 450 HP horsepower or more
  3. enhances acceleration response
  4. prevents compression surge
  5. prolongs turbo life
  6. easy installation
  7. results are immediate
  8. made in USA
Kit Includes:
- 1) NPT Fitting screws into intake manifold (replaces small nipple) 
- 1) NPT Tap Threader Bit for tap threading intake manifold 
- 1) Drill Bit for drilling hole into intake manifold 
- 1) Vacuum Hose, 1/4” Inside dimension non-collapsible 
- 1) Loctite glue applied to threads on NPT Fitting
NOTE: REMOVE Existing Hose from your kit. Do not create a “T" fitting with this kit, 
the NPT Fitting is a dedicated direct source from the Intake manifold to the BOV (or diverters).  

WORKS very good with TIAL blow off valves.

1) Using our Drill Bit provided, cut/drill out your existing (small nipple) on 
your Intake Manifold. 
2) Using our NPT Tap Threader Bit provided, tap thread intake manifold, 
and screw in new NPT Fitting with Loctite glue on threads. 10/min. 
set-time, 24/hr cure time. 
3) Slide on Vacuum Hose provided to NPT Fitting and your Blow-Off Valve port. 
No glue/hose clamps necessary.

Online Instructions with pictures:

Key Notes: Ultimately ensure you are getting one smooth release on the BOV 
at throttle closure and that there is not any compressor surge, as compressor 
surge can damage the turbos. You will want to make sure you have a BOV 
(or diverters) that can move enough airflow from the system as well as having 
it adjusted properly.
  • Item #: BOVPLMB18
  • Manufacturer: Kinobi Lighting
  • Condition: New

BOV Plumb Kit | Upgrade for Blow Off Valves | Increase Vacuum

Price: $79.99
Sale Price: $59.90
5 or more: $45.90 each
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review